МЕНЮ
DISTRIBUTION FIBER OPTIC CABLE
ОКТ-Д

DESCRIPTION:
Optical cable intended for laying by manual or mechanized methods in subchannels, cable duct lines, pipes, units, etc. with no danger of damage by rodents, for suspension on supports of communication lines, power lines, between buildings and structures as a distribution cable.

REGULATORY DOCUMENTS: Technical Specifications (TU) BY 800003452.019-2016
      Order
      1. Optical fiber (OF);
      2. Intra-modular hydrophobic filler;
      3. Central optical module (COM);
      4. Peripheral strength member – fiberglass bars;
      5. Outer sheath – light-stabilized polyethylene



      • Cable construction details
          • Number of optical fibers in the cable is from 1 to 48
          • Number of fibers in the module is from 1 to 48
        • Operating parameters
          • Operating temperature range * is from minus 60 °C to 70 °C
          • Installation temperature * is from minus 10 °C to 60 °C
          • Transportation and storage temperature * is from minus 40 °C to 60 °C
          • Minimum bend radius during installation and operation – 20xD (D-cable diameter)
          • Cable service time is not less than 25 years

        • Technical parameters of the cable
          • Operating temperature range is from minus 60 °C to 70 °C
          • Permissible tensile force is from 0.5 to 20.0 kN
          • Permissible crushing force — 0.20 kN/cm
          • Dynamic bends — 25 cycles at an angle of ± 90°
          • Axial twist — 5 cycles at an angle of 360° with a length of 2m
          • Impact energy — 5 J
          • Dropping of the hydrophobic compound at the cut — no dropping at temperature above 60 °C

        Calculated values of weight and diameter of the cable type ОКТ-Д for 1.0 kN
        Calculated values of weight and diameter of the cable type ОКТ-Д for 1.5 kN
        Calculated values of weight and diameter of the cable type ОКТ-Д for 2.7 kN
        Cable type designation
        ОК
        Cable type – optical cable
        Т–
        Core type – centrally located tube
        Х
        Strength member type:
        D – fiberglass bars;
        AD – aramid fibers and fiberglass bars
        (Х)
        Maximum tensile force value, kN
        Х–
        Protection sheath material:
        P – polyethylene;
        Png(A)-HF – flame retardant polymer with low smoke and gas emission, halogen-free
        Х Х
        OF number in a centrally located tube / OF type
        Design versions:
        • Strength member – aramid fibers
        • Flame retardant polymer sheath with low smoke and gas emission, halogen-free (Png(A)-HF)
        CONTACTS
        Sign up to our newsletter and be first to know about our discounts!
        © 2018 MCP Minskkabel JLLC
        Website development and design: Yuliya Lyotka